- #2009 imac for recording how to
- #2009 imac for recording mac os
- #2009 imac for recording driver
- #2009 imac for recording full
- #2009 imac for recording pro
They support up to 8 GB of RAM and are the first iMacs to use SATA optical drives. The March 2009 iMacs have four USB 2.0 ports (one more than before), FireWire 800 (but no longer 400), gigabit ethernet, 802.11n WiFi, Bluetooth 2.1+EDR, and an 8x SuperDrive – as well as a slim keyboard with two USB 2.0 ports. (ATI Radeon HD 4850 is a build-to-order option on the high-end iMacs.) The low-end iMacs use the same Nvidia GeForce 9400M GPU found in current MacBooks and the new Mac mini, while the high-end iMacs use GeForce GT graphics. When I checked the MicPort on it’s own it worked fine & the Duet worked fine, even in the 3 track configuration.Apple has updated the iMac with Nvidia graphics as a standard feature ( the Early 2008 iMac used Radeon graphics, although there was an Nvidia GeForce 8800 GS build-to-order option for the 24″ model). The input from the MicPort was corrupted with some kind of ‘interference’ noise. I thought I was home free at this point, however, it didn’t work. I was also able to get Logic to recognize it as a 3-track device. I was able to make the aggregate device, as instructed in the article. I just tried combining my Apogee Duet with a MicPort Pro. You can claim your Top 100 Blogs Award Badge at Hello! Our selection committee compiled an exclusive list of the TopĪudio Blogs, and yours was included in the Top 100!Check it out at ?ģ Responses to “How to Record in Stereo via USB”
#2009 imac for recording how to
Now, for your homework, figure out how to do mid-side recording in GarageBand via USB. The mics on the kit were my go-to SDC pair, Oktava MK-012s. See also the aforementioned USB Preamp Shootout. I think this is the best of the 16-bit USB preamps. Shure X2U – a fully-featured 16-bit ADC with a nice clean mic preamp, a headphone jack, and a “mix” control for zero-latency monitoring. Simply put, this mic pre sounds as good as your DAW.
#2009 imac for recording pro
It is not the best drum recording you’ve ever heard, but it is in stereo.įor the curious, here is the gear used in the drum demo:ĬEntrance MicPort Pro – a 24-bit, 96kHz ADC with a high-end mic pre and plenty of gain. Here is a demo to prove the concept: a stereo recording of a drum kit using two USB mic preamps. Needless to say, you’ll have to be careful about matching gain levels on the two channels, especially if you’ve used two different brands or models of USB preamp. Now go into your audio application, such as GarageBand, and select the new aggregate device as your input.
#2009 imac for recording full
(Click the screenshot to see the image in full size.) Now you can open the Sound Preference Pane (within System Preferences) to see and select the new aggregate stereo device, which will be listed with whatever name you gave it back in the Aggregate Device Editor. These show up as separate lines in the device listing. Some USB interfaces have both inputs and outputs. In the lower half of the window, select the two inputs you want to aggregate. (Click screenshot to see the image in full size.)Ĭlick the + button to create a new aggregate device. Under the Audio menu, select Open Aggregate Device Editor. (You’ll find it in either the Applications folder, or in the Utilities folder within the Applications folder.) The OS doesn’t care about the brand name of the input device. It is not necessary to have two matched USB mic preamps to record in stereo! In the demo below, I used a CEntrance MicPort Pro and a Shure X2U together with great results. Some interface manufacturers warn that USB audio input devices should not be plugged into USB hubs, as they won’t get enough bus power for proper operation, so for best results plug the interfaces directly into the computer. Plug two USB mic preamps into two available USB ports on the computer. Here is a video tutorial showing exactly how to do it:
#2009 imac for recording driver
Mac users have no need for custom driver software - the OS will aggregate multiple mono sources into a stereo input with no additional software. Note: it doesn’t work for Vista, as of this writing. If you use Windows, the only sure bet I know of is to buy a pair of MicPort Pro interfaces, and use the CEntrance Universal Driver for Windows to aggregate them into a single stereo input device. Following are the simple instructions, a video tutorial, and a video demo of recording a drum kit in stereo via two USB mic pre’s.
#2009 imac for recording mac os
Using Mac OS X, it’s not only possible, but easy.
Is it possible to use two USB microphone interfaces to record in stereo? Any sort of field recording or concert taping, and many acoustic instruments, would benefit from being recorded in stereo. While working on the USB audio interface review, I got to wondering about recording in stereo.